PJ100W (4 bands)

The PJ100W is a high-power device that has high-gain directional external antennas with 3 bands each. It has a potentiometer in each module that allows you to limit its range.

The external antennas included in the equipment can be manually directed towards the areas where the blocking is to be applied.

The 100° illumination of the antennas allows for a greater breadth of coverage.

Remote Management Software for PJ100W

Real-time monitoring of the status of each unit and of failures in the RF modules.
Display of the temperature of each unit.
On/Off of one, several or all the jammers through the software (remote).
Plug and play solution to use immediately after connecting; the IP configuration of each jammer configured for each unit (according to the factory configuration, but the network configuration can be modified by the installer (if the network does not have a standard configuration).
We also implemented sound messages that can be activated if required, providing alerts or information on the status of the jammers.

Each unit offers a key lock support & mounting hardware

The jamming radius depends on the signal strength in a given area. All cellular mobiles in proximity to the PJ100W will be totally blocked and will not be able to receive or dial outgoing calls.

Directional antenna:

Advantages & Features

1. Each unit can jam up to 4 frequency bands simultaneously.
2. Continuous operation even in hot climates with no time limit
3. Design for outdoor installation.
4. Secure design to avoid sabotage.
5. Antenna type options – omni or directional antennas.
6. Selection of antennas to provide more flexibility regarding jamming coverage.
7. Waterproof case
8. Directional or omni antennas Options